Thingiverse

Big Berkey Stand

by peter2black

13 Downloads

12 Likes

1 Makes

a remix of https://www.prusaprinters.org/prints/3154

fits Big Berkey® System (2.25 Gal ~ 8.5 l)
https://www.bigberkeywaterfilterusa.com/product/big-berkey/

I changed the size to 181mm so it fits inside a rubber ring at the base,
print legs up (as in STL file)

it took 7.5h on my Ender 3 with 0.6 nozzle (0.48 resolution, 30% infil) ;)

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Est. print time

7.5 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Big Berkey Stand?

Any FDM printer should handle Big Berkey Stand just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

How long does it take to print Big Berkey Stand?

According to the design notes, Big Berkey Stand takes approximately 7.5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Big Berkey Stand available in?

Big Berkey Stand is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Big Berkey Stand free to download?

Yes, Big Berkey Stand is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Big Berkey Stand

Add to Collection