Big LED Arch

Big LED Arch with only 3 different parts to print.

No support needed, just use brim for the Arch.

You need to print:
- 14x Arch.stl,
- 1x Base1.stl or Base1_touch.stl and
- 1x Base2.stl.

Each base have cutouts for 7 x M12 nuts (the Touch-Version 8x), to add weight (about 100g per side).
It's not needed, but could add stability.
To insert the nuts you must stop the print after 10.7mm layer! (M600 - Filament change)

The switch hole on Base1 is 13x20mm (you can ad a support there, but is not needed).
Matching switches: [2 way rocker On-Off](https://www.reichelt.de/wippschalter-1x-aus-schwarz-i-o-wippe-1801-2106-p154411.html), [3 way rocker On-Off-On](https://www.reichelt.de/wippschalter-1x-um-schwarz-i-o-ii-wippe-1808-1103-p108238.html)

On the Arch there fits two 10mm LED Strips side by side with a length of 230cm. (100cm 71er Arch)

Size assembled:
Width: 154cm
Height: 81cm

If you want to use the 3 way rocker:
You can solder the + from stripe one to "I", t