Thingiverse
BigBadBumbleBee aka BBBB
door Morokolli
1
Downloads
4
Likes
0
Makes
Got bored to my old trustworthy Tarot 680 hex.
So I decided to convert it to "skyripping" quadcopter.
Print attached parts, specially top & bottom, remove front and tail arms from Tarot hex, and plug & fly. There is spacers and fc-vtx plate attached also.
You can also scratch build your own. 16mm tubes fits perfectly. On both cases you need atleast 8 3x40mm screws & nyloc nuts.
Mine is printed from PLA. My printed doesn't do good enough ABS.
Specs:
Fc: revo acro with Betaflight
Rx: crossfire
Vtx: 5.8ghz
Motors: Quanum MT4108/580kv
Esc: multistar 30A blheli-s
Size: around 620
Props: 15x5,5
Battery: 10000mAh/4s for longrange, 4000mAh 4s for backyard
Weight: 1200g without battery
No gps, no level mode..
So I decided to convert it to "skyripping" quadcopter.
Print attached parts, specially top & bottom, remove front and tail arms from Tarot hex, and plug & fly. There is spacers and fc-vtx plate attached also.
You can also scratch build your own. 16mm tubes fits perfectly. On both cases you need atleast 8 3x40mm screws & nyloc nuts.
Mine is printed from PLA. My printed doesn't do good enough ABS.
Specs:
Fc: revo acro with Betaflight
Rx: crossfire
Vtx: 5.8ghz
Motors: Quanum MT4108/580kv
Esc: multistar 30A blheli-s
Size: around 620
Props: 15x5,5
Battery: 10000mAh/4s for longrange, 4000mAh 4s for backyard
Weight: 1200g without battery
No gps, no level mode..
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!