Thingiverse
Bike Lamp Bracket
door maxximum
59
Downloads
70
Likes
0
Makes
Bracket to mount LED Lamp to the handlebars of your Bike.
Works with most Lamps that have the "standard" one screw mount (e.g. MagicShine and almost all chinese copys)
Print with no supports at 20% infill oriented like shown in teh pictures for max. strength in force direction.
To assemble you will need 2 self tapping plastic screws (3mm). 3mm woodscrews also work.
You can use nomal metric M3 with nuts on the other side, but I found woodscrews are working great if you don't overtighten them.
For assembling the lamp to the bracket you can simply use the countersunk screw that came with your lamp or any equivalent.
Works with most Lamps that have the "standard" one screw mount (e.g. MagicShine and almost all chinese copys)
Print with no supports at 20% infill oriented like shown in teh pictures for max. strength in force direction.
To assemble you will need 2 self tapping plastic screws (3mm). 3mm woodscrews also work.
You can use nomal metric M3 with nuts on the other side, but I found woodscrews are working great if you don't overtighten them.
For assembling the lamp to the bracket you can simply use the countersunk screw that came with your lamp or any equivalent.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
