Bike lock holder

A mount for attaching a bike lock to a bike. The lock can only be removed by swinging around 90 degrees - so it is secure on the bike but doesn't have a catch / release mechanism. The lock swings around a little - but not enough to be a problem.

You'll need a small bolt (mine is a M4x60mm iirc) through the top hole to secure the two parts, and a shorter bolt through the bottom to secure the underneath. You might want to put a small strip of rubber / rolled up tape on the underside to prevent scratching the frame.

Obviously bike locks and frames differ quite a bit, so you might need to edit the model (blender file attached) as necessary.