Bike lock mount

This bike lock mount is designed for locks with a T-mount. The dimensions of the T-mount can be found in the provided images.For installation, a countersunk M3 screw with a minimum thread length of 25 mm is required. Additionally, an M3 nut with a maximum height of 2,4 mm is needed. If the "Insert-Mid-Print" version is printed, the nut must be inserted during the print pause.The mount is designed for a 32,5 mm tube, but it should also work for slightly different diameters. Furthermore, if a cable channel runs behind the tube, there is sufficient space for it, as a 4,5 mm diameter channel has been accounted for.