Bike Pump Holder

This is a mount for your bike pump or any other tubular object. Screws onto the bottle cage mounts (2.5" spacing).

The OpenSCAD model is partly parametric, meaning you can adjust it to fit your pump.

The provided STL is for a pump 22mm diameter, and bike frame 45mm diameter.

If printing PLA, then 3 shells and 20% fill will work. If you use more shells or a higher fill rate then it will be stiffer and the hold will be much tighter. My first print was 40% fill and 6 shells and it was too tight. With ABS you can probably use slightly more shells due to its increased elasticity.