biker santa

by Brammerdk

52 Downloads

40 Likes

18 Makes

Download Model

hueforge biker santa Christmas

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Prima Value Light gray Transmission Distance: 4 Filafarm White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Star