Thingiverse

Bio hazard barrel

by Lavionus

7 Downloads

12 Likes

0 Makes

Barrel for holding can.
Handle is designed as human hand mutated into tentacle.

Preview printed from PLA with supports.
Printing time about 9 hours.

biohazard can canholder cup hand holder mug mutant tentacle

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Est. print time

9 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Bio hazard barrel need supports when printing?

Yes, Bio hazard barrel will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Bio hazard barrel?

According to the design notes, Bio hazard barrel takes approximately 9 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Bio hazard barrel available in?

Bio hazard barrel is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Bio hazard barrel free to download?

Yes, Bio hazard barrel is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Bio hazard barrel

Add to Collection