Thingiverse
Bioball 5cm
door Togusha
10
Downloads
13
Likes
0
Makes
Bioball for biological filter for aquariums or ponds. Inside the ball you can place a piece of thin sponge or synthetic cotton to improve them.
These bolan are prepared to be able to close them with 1 or 2 flanges and also with 2 or 4 3mmx10mm wood screws.
Recommended not to print on biodegradable filaments such as PLA. Preferably natural colored ABS or PETG (no dyes)
The bioballs v2 have a weight of 21gr (24gr with supports) and walls of 1.6mm.
The bioballs v3 have a weight of 11gr (14gr with supports) and walls of 0.8mm. I recommend the v3 as they use less plastic and are strong enough.
These bolan are prepared to be able to close them with 1 or 2 flanges and also with 2 or 4 3mmx10mm wood screws.
Recommended not to print on biodegradable filaments such as PLA. Preferably natural colored ABS or PETG (no dyes)
The bioballs v2 have a weight of 21gr (24gr with supports) and walls of 1.6mm.
The bioballs v3 have a weight of 11gr (14gr with supports) and walls of 0.8mm. I recommend the v3 as they use less plastic and are strong enough.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
