BIQU BX upgrades by CippyO

I have made a bunch of printable mods for the BX. Every part is rotated to the best printing orientation.Tiltable, rotatable screen mountNo support needed. Remove the sacrificial layer with a lexan body reamer/drill, or a step drill.You will need 4 m3 screws for the hinges: 2 m3 by 20mm and 2 m3 by 35-40mm, and at least one m3 washer per screw. You might have to raise the printer in order to be able to set the screen completely vertical. There are printable legs that can raise the printer with about 1-2 cm. It was necessary to lower the screen to avoid collision with the X gantry, especially when printing from usb. You will need 2 spacers(3x6x2mm) in order to provide a leveled mount for the screen mount. Also you'll need 4 m2.5 by 6mm screw to mount the screen. I have not tested the Raspberry compatibility, but i assume if you stretch the spacer and use a very long m2.5 screw it can work.Files:4040 mount.stlarm.stlscreen_mount.stlscreen.stl3x6x2spacer.stlX EndcapsI really like the desi