Biqu H2 Mount Anycubic Mega

This model is for the AnyCubic Mega X. The model with the 2020 extrusion on the XY axis vertical rail. You will need to insert M3 melt-in inserts. There are 4x on this model. Easily done with a soldiering iron. You will need 11x M3/5mm bolts and 2x M3/18mm bolts. The Biqu H2 comes with a 24v heatsink 35mmX10mm fan. you will need to purchase a 12v model to replace the 24v unit. AnyCubic is a 12v machine. You will also need a 5015 blower. Look for a .35amp unit. It blows a lot more air. The factory back plate mount directly behind the mount. OEM roller bolt mount thru the new mount, also 3x M3/5mm bolt hold for an extra support. Its a semi tight fit sliding the H2 extruder into the mount so be careful. You will need to install the wire for the heatsink fan thru the top right hole before sliding in. It is a very clean look. Unit also has the endstop block set on the left side of the unit. I used a PC4-M6 Fittings in Gold with a short piece of PTFE tubing (optional). I also designed a mou