BIQU TFT 35 panel cover

This is my design for a BIQU TFT 35 display cover when mounted on a panel for an electrical switchboard to an MPCNC. The bezel hides the flex strip leading to the display. 3mm socket head screws are used for mounting. My box has a 2mm thick wall, for safe assembly I recommend inserting a 6mm roller pad between the panel and the circuit board - for example, print it.

The opening for the switch wheel has no clearance, I recommend enlarging the opening, either in the model or re-drilling, otherwise there is a risk that the button will not return when pressed.

I am also attaching a DXF template 1:1 TFT35 for possible cutting of the mounting hole.