Thingiverse
Bird Feeder Platform
von fenrirrm
3
Downloads
7
Likes
0
Makes
I had some left over wine bottles in my house and decided to drill and hang them with some seeds to feed the birds, so I made a little porch for them.
Since it will be hanging around on the outside, I printed on ABS, wouldn't recommend using PLA.
The STL already rotated, print it with ~15% infill and some supports on the base.
Fusion360 file attached if you wanna make some modifications.
After printing if you feel like using just one side, you can glue with hot glue. If you want to use on both sides, I made a little hole inside to put a screw to secure between them
Since it will be hanging around on the outside, I printed on ABS, wouldn't recommend using PLA.
The STL already rotated, print it with ~15% infill and some supports on the base.
Fusion360 file attached if you wanna make some modifications.
After printing if you feel like using just one side, you can glue with hot glue. If you want to use on both sides, I made a little hole inside to put a screw to secure between them
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
