Thingiverse
Bird Feeders; Tray Type
door LJClark
73
Downloads
68
Likes
0
Makes
Six Versions of a Bird Feeder Tray
This project consists of a set of tray-type bird feeders that I have deployed on my deck.
The basic square tray is 120mm on a side, and the long trays are 120mm x 240mm. The long trays come in single and double compartment versions. All trays also come in a version with a perch. The perch is flattened on the bottom, so you won't need supports
All versions have recessed holes to take #8 deck screws. They attach easily to fence rails and balcony/deck cap rails. Slots in the corners to drain water. You might want to close the unused screw holes with a dab of silicone sealer.
I use these feeders in conjunction with a couple of tube type feeder. I attached the version with the perch outside my kitchen window. I recommend using three 3-inch corner brackets (to reduce sag) with sheet metal screws up into the tray on the ends and in the middle. I can reload the feeder by just opening the window and adding seed. The perch accommodates
This project consists of a set of tray-type bird feeders that I have deployed on my deck.
The basic square tray is 120mm on a side, and the long trays are 120mm x 240mm. The long trays come in single and double compartment versions. All trays also come in a version with a perch. The perch is flattened on the bottom, so you won't need supports
All versions have recessed holes to take #8 deck screws. They attach easily to fence rails and balcony/deck cap rails. Slots in the corners to drain water. You might want to close the unused screw holes with a dab of silicone sealer.
I use these feeders in conjunction with a couple of tube type feeder. I attached the version with the perch outside my kitchen window. I recommend using three 3-inch corner brackets (to reduce sag) with sheet metal screws up into the tray on the ends and in the middle. I can reload the feeder by just opening the window and adding seed. The perch accommodates
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!