Bird House

This round birdhouse consists of four parts: a base, a removable front panel with an entrance hole, a detachable top, and a separate perch. The front panel and top are held in place by four small magnets (D8x2) that are to be glued into the designated slots. The perch is printed separately and easily screws into the front panel using built-in threading.The back of the birdhouse includes two keyhole slots, allowing it to be securely mounted using two screws. Thanks to its smart modular design, the birdhouse is easy to assemble, hang, open, and clean.Printed in PLA, a better option is printing in PETG or ABSPrinted with support material for the back plate. It can probably also be done with normal support, you might have to sand it a bitDepending on the climate. Better not hang in the sun, the birds don't like it that much either.The entrance hole is 32mm, suitable for great tits, among othersKeep a close eye on the polarity of the magnets.Mark all the magnets on the same pole before