BirdDog P100 Camera Mount

This is a two part camera mount for a BirdDog P100 PTZ camera. It's designed to allow a P100 to be hung upside down under a balcony/ceiling. The BirdDog P100 is attached to the underside of the Bottom Camera Plate. The Upper Rail is screwed to the overhanging surface and the Bottom Camera Plate slides into the dovetail rail before being secured by a screw in the front face.

By printing multiple Upper Rail Mounts, you can quickly move the camera between locations. Alternatively there is a tripod bush moulded into the Bottom Camera Plate so that you can turn the camera the right way up and then horziontally attach it to a tripod. **DO NOT HANG IT FROM THE TRIPOD BUSH!**

The following hardware is needed to complete the unit
a) A M4 square half nut to fit into the slot in the top of the Upper Rail Mount
b) A M4 hex head capscrew at least 10mm long to fit in the front of the Bottom Camera Plate and to go into the square half nut in the Upper Rail Mount. This holds both halve