Thingiverse
BL-Touch Adapter for K8200 (E3DV6 version)
par cosudor
9
Téléchargements
8
Likes
0
Makes
An adjustable adapter to mount a BL-Touch sensor to the Z-axis of a K8200.
Needed additionally:
1 pc. M5x15
2 pc. M3x10
1 pc. M3x25 or M3x30
3 pc. M3 hex nut
1 pc. M5 square nut (for K8200 profile)
I used this to install a BL-Touch with distance y=0 and x=25mm to the extruder.
The difference in height between BL-Touch lower side and nozzle is 8.3 mm
and can be adjusted +/- 1.5 mm using a long hole (translation).
It is now up and running with my RADDS electronics and Repetier firmware, so I removed the "work in progress" flag.
Needed additionally:
1 pc. M5x15
2 pc. M3x10
1 pc. M3x25 or M3x30
3 pc. M3 hex nut
1 pc. M5 square nut (for K8200 profile)
I used this to install a BL-Touch with distance y=0 and x=25mm to the extruder.
The difference in height between BL-Touch lower side and nozzle is 8.3 mm
and can be adjusted +/- 1.5 mm using a long hole (translation).
It is now up and running with my RADDS electronics and Repetier firmware, so I removed the "work in progress" flag.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !