Black Devil Doll Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x112.46mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4This print uses 4 unique filamentsSwap Instructions: Start with Charcoal At layer #9 (0.8mm) swap to Red At layer #13 (1.12mm) swap to OrangeBorder Only Colors from here until the end. At layer #20 (1.68mm) swap to Lemon Yellow for the rest.