black dragon keep

Project: blackdragon.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Gray Transmission Distance: 2 PLA PolyLite Pro Metallic Silver Transmission Distance: 1.5 PLA Prusament Pearl White Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Gray At layer #10 (0.88mm) swap to Metallic Silver At layer #16 (1.36mm) swap to Pearl White for the rest.