Black Goku

Project: GOKU NEGROPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 160x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.9mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA smartfil morado Transmission Distance: 1.6 PLA smartfil pink Transmission Distance: 7.4 PLA smatfil rojo Transmission Distance: 2.3 PLA PolyLite Pink Transmission Distance: 3 PLA Default White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to morado At layer #9 (0.8mm) swap to pink At layer #11 (0.96mm) swap to rojo At layer #13 (1.12mm) swap to Pink At layer #16 (1.36mm) swap to White for the rest.Boost MeTe a gustado ?