Black Queens Dragon

Black Queens Dragon, have printed in both PLA & PETG, steve.m commented on my dragonlfy that he put it together without bearings, in this model I have added a strengthened Hub for use with no bearing.You will need 3 x 7mm Screw eyes or similar3mm x 60mm shaft, can be threaded rod, brass etc ( I purchased some from aliexpress )2 x 683zz Bearings ( Optional )Print all components, if using PLA I suggest you print the rope guide in PETG, Black PLA has never worked well in the sun for me.Insert the 3mm Rod into Body B, note I put a drop of super glue on the rod for security, Glue all 4 wings into the hub as per picture, note if using the hub with Bearings, press bearings in before gluing up wings, install the 3 crew eyes into body A & B including rope guide.Place wings onto body B then push body A on, Glue the Flame in & hang as per picture, Take not orientation of the Rope guide, its angled like that so the dragon can survive strong winds & finally you will notice there are small holes in