Thingiverse
Blade 120 s2 flight controller cradle
door mikelehuh
2
Downloads
2
Likes
0
Makes
Swapped the stock plastic frame for the carbon-fiber Microheli frame. The plastic parts and dampers that come with that frame disappeared in the yard so I had to make this cradle to mount the controller.
Should print out of the box, but will need some screws, small washers, and dampers.
The sidewalls arent really required and can be removed. Otherwise, works very nicely.
Might want to lengthen and widen by 1mm so that the controller is not so snug with the dampers, but even with a tight fight, it looks to work.
Should print out of the box, but will need some screws, small washers, and dampers.
The sidewalls arent really required and can be removed. Otherwise, works very nicely.
Might want to lengthen and widen by 1mm so that the controller is not so snug with the dampers, but even with a tight fight, it looks to work.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!