Blade Runner HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 106x150mm in size You may print at higher layer heights below the Min Depth of 0.4mm The Max Depth is 2mm and the Actual Depth is 2.1mm Filaments Used: PLA Ele goo Black Transmission Distance: 0.2 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA Ele goo White Transmission Distance: 5.5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Red At layer #13 (1.12mm) swap to Yellow At layer #17 (1.44mm) swap to White for the rest.