Blame Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x179.29mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA+ Sunlu Grey Transmission Distance: 2
PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #2 (0.24mm) swap to Black
At layer #13 (1.12mm) swap to Grey
At layer #19 (1.6mm) swap to White for the rest.