Thingiverse
Blast Gate / Dust Gate / Sperrschieber
door Woodenti_
222
Downloads
142
Likes
1
Makes
Blast Gate for HT pipes
Currently available for:
- DN 50
- DN 40
- NEW: DN75 added
Available in different lengths:
- DN50: 25mm and 47mm
- DN40: 25mm and 40mm
Available in different versions:
- Do --> outer Diameter of 3D part is 50, i.e. fits into sleeve
- Di --> inner Diameter of 3D part is 50, i.e. pipe fits into 3D part.
Remark:
- any combination within a certain diameter are possible, so also Di_lower with Do_upper, in case one side goes into the pipe, and on the other end, the pipe goes into the part.
- slider and middle are identical for Di and Do versions.
All you need for assembly are:
- 6 M4x16 mm hex head bolts
- 6 M4 nuts
- 6 washers for M4 (optional)
Feel free to support me by donations via Paypal, see link in Bio. - THANKS!
Currently available for:
- DN 50
- DN 40
- NEW: DN75 added
Available in different lengths:
- DN50: 25mm and 47mm
- DN40: 25mm and 40mm
Available in different versions:
- Do --> outer Diameter of 3D part is 50, i.e. fits into sleeve
- Di --> inner Diameter of 3D part is 50, i.e. pipe fits into 3D part.
Remark:
- any combination within a certain diameter are possible, so also Di_lower with Do_upper, in case one side goes into the pipe, and on the other end, the pipe goes into the part.
- slider and middle are identical for Di and Do versions.
All you need for assembly are:
- 6 M4x16 mm hex head bolts
- 6 M4 nuts
- 6 washers for M4 (optional)
Feel free to support me by donations via Paypal, see link in Bio. - THANKS!
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
