Blastoise Card- Hueforge

by Brad Barr · 2D Art

19 Downloads

11 Likes

8 Makes

Project: Blastoise card.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 142.86x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #0041cc PLA+ Sunlu Blue Transmission Distance: 4 #eac322 PLA+ Sunlu Yellow Transmission Distance: 5 #ffffff PLA+ Sunlu White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue At layer #17 (1.44mm) swap to Yellow At layer #20 (1.68mm) swap to White At layer #23 (1.92mm) swap to Yellow for the rest.