Block Clock Ring

This is to make a ring that can function as a clock by using a 1-meter long WS2812B light strip.

How I assembled this:
1. Print 6 of the ring sections & 6 ring brace components, base, stand, base cover, and 5 ring covers
2. Arrange sections in a circle on a flat surface. Get a hose clamp that completely encircles them - may have to daisy-chain a few hose clamps together.
3. Only 5 sections will need to be glued together. Mark the extra section with a marker so it does NOT get glued to the rest.
4. Glue the 5 sections together and tighten hose clamp(s) to help adjust and hold the circle shape.
5. Apply glue to 4 of the ring braces and assemble them to the glued sections with 1/4x20 bolts.
6. Once glue sets, assemble the partial ring section onto the base with two remaining ring braces.
7. Test fit the light strip around the outer wall of the "C" channel.
Notes: I had to trim some excess length from the tail end of my light strip. There is a relief where the wires go into the