Thingiverse
Blower/Vacuum
di Kilgara2B
10
Download
7
Likes
0
Makes
A simple blower, vacuum generator I tried to make for my CNC3018. I am more interested in the suction force than the vaccuum itself.
**/!\ WARNING:** I made it to be use with a 775 DC motor high speed. Be careful! PLA is fragile and can break with centrifugal forces.
## Needed Pieces :
- 4 x M3 screws with their bolts
- 2 x M4 L ~= 16mm screws to hold the motor in place
- 1 x 775 DC motor (12V ~ 24V)
*Note : Be carefull with the rotation of the motor. In any case is going to blow but if it turn in the wrong direction you could have large power lose.*
**/!\ WARNING:** I made it to be use with a 775 DC motor high speed. Be careful! PLA is fragile and can break with centrifugal forces.
## Needed Pieces :
- 4 x M3 screws with their bolts
- 2 x M4 L ~= 16mm screws to hold the motor in place
- 1 x 775 DC motor (12V ~ 24V)
*Note : Be carefull with the rotation of the motor. In any case is going to blow but if it turn in the wrong direction you could have large power lose.*
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
