Thingiverse

BLTouch Adjustable Mount for Anycubic Kossel

by Ebb_Flow

633 Downloads

432 Likes

3 Makes

I made this BLTouch adjustable mount for the Anycubic Kossel. It clips onto the effector and has a screw to hold it in place tightly. You will need (3) M3 x 8mm socket head cap screw w/ nut, two for the adjustable portion and one for tightening the mount to the effector. Secure the BLTouch to the slider first, then connect the slider to the clip. Lastly attach and tighten the clip to the effector and adjust the slider to achieve 8.3mm from the plastic end of the bl touch to the end of the hot end nozzle tip.

Anycubic Anycubic Delta Anycubic Kossel Anycubic Kossel Plus BLTouch BLTouch Classic bltouch mount Anycubic Anycubic Delta Anycubic Kossel Anycubic Kossel Plus BLTouch BLTouch Classic bltouch mount

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format