BLTouch Mount for Hypercube Evolution

Update 8/7/2019:
Modified the BLTouch Offset Mount to allow additional height adjustment.

The BLTouch Smart V2 sensor requires an adjustment of 8mm +/- .5mm height difference between the bottom of the BLTouch housing and the nozzle tip. With the original mount I could not achieve this dimension.

This is a remix of [einarms](https://www.thingiverse.com/einarms)'s [Bltouch Mount Hypercube Evolution](https://www.thingiverse.com/thing:2464991). The shank length is lengthened and the sensor flange thickness is reduced to allow additional adjustment ability.

A gauge to set the 8mm dimension is [here](https://www.thingiverse.com/thing:3158237)


# UPDATE # 10/21/18
There is a "15mm or greater" distance from the heat block specification defined for the BLTouch. The original mount places the probe 5mm from the heat block. I have not found this to be an issue, but I decided to create an offset mount to try. I found that when using the offset mount the probe can hit the right hand