Thingiverse
BLTouch Printmate 3D
von 3d-druck-lingen
3
Downloads
2
Likes
0
Makes
I wanted to level my Printed of my Printmate3D with a BLTouch. For this I needed a mount direct to the Extruder head. This fits good to my Printmate, depending on what kind´d of Heartbreak you use (longer or shorter) you you can scale this in the z-axis. Sadly you really need to try this out, you don´t have much space to get the BLTouch working correctly.
You need to drill two holes into the wooden clamp for the Hotend, but this is no problem. All holes are for 3mm screws.
If you have any questions don´t hesitate to ask.
Here is a Video of the working BLTouch:
https://www.youtube.com/watch?v=hKjThycnXYM
You need to drill two holes into the wooden clamp for the Hotend, but this is no problem. All holes are for 3mm screws.
If you have any questions don´t hesitate to ask.
Here is a Video of the working BLTouch:
https://www.youtube.com/watch?v=hKjThycnXYM
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
