blue angels flyover

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 200x182.04mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 2mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PETG JAYO Gray Transmission Distance: 2.5 PETG GEETECH Gray Transmission Distance: 3 PETG JAYO White Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #6 (0.64mm) swap to Gray At layer #11 (1.04mm) swap to Gray At layer #17 (1.52mm) swap to White for the rest.