Blue Flower

Project: flowerPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150.65x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.32mmThe Max Depth is 2.1mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Turquoise Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 3.6This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #12 (1.04mm) swap to Turquoise At layer #20 (1.68mm) swap to Yellow for the rest.