Blue Moth

Use care when removing releasing from the plate. I recommend a scraper to loosen the antennae. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in size You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PL