BlueRetro_PS1

This is a bluetooth receiver for the PS1 / PS2. With the receiver, modern wireless Bluetooth controllers can be used on the PS1 and PS2.

This receiver is based on the BlueRetro project. BlueRetro supports many classic consoles, not just the PS1 / PS2. For more information see: https://github.com/darthcloud/BlueRetro

An ESP32 is required for BlueRetro. I used an ESP32 d1 mini board for the receiver because it is quite small. I also designed a small circuit board that offers space for a voltage converter, makes wiring easier and brings two buttons and two LEDs to the front of the housing.
Together with this 3d printed housing it results in a compact receiver.

The parts needed for this receiver are:
• 3d printed case
• PS1 / 2 controller connector
• ESP32 d1 mini
• BlueRetro_PS1_Shield (with components)
• 4 pieces m2x16 machine screws
• 4 pieces m2 nuts

3d printed case:
This should be easy to print. The lower part has to be printed with support, but this can also be re