Slicer Discord
BlueSCSI DB25 External Case – 3D-printbaar model van Thingiverse Thingiverse

BlueSCSI DB25 External Case

door branchus
6 Downloads
7 Likes
0 Makes
Model downloaden
I designed this case to be much more durable than the one supplied with the BlueSCSI source files. I also built it so that the bottom of the case doesn't extend all the way to the end of the PCB so that it will easily plug into the vintage Macs with plastic ridges under the SCSI port, like the IIcx, IIci, Quadra 700, Quadra 660AV, Quadra 610 and PowerMac 6100. This does leave the connector pins exposed, so be careful not to accidentally short the connector if you are using a computer with a metal case.

The BlueSCSI snaps into the bottom of the case and the top of the case snaps into the bottom case. Place the rear tab in place first then use that as a sort of hinge to snap the top case closed. There is a ridge on the bottom case used to hold the BlueSCSI in place using the pins of the headers that poke out the bottom of the board. If you need to open the case, there are small slits in the side in case you need to use a flathead screwdriver to prise them apart. If you need to remove t
Bron
Thingiverse
Wat je nodig hebt om te printen: Beginner Lage betrouwbaarheid
Eendelig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA, Polycarbonate
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie