Thingiverse
BlueSCSI v2 Drive Sled
door branchus
10
Downloads
13
Likes
0
Makes
This is a BlueSCSI drive sled for use in beige vintage Macintosh computers. Models like the Quadra 610 and 660AV plus most of the beige PowerPC desktops and towers.
In some models it will clip securely into place, for others it is simply held in by the friction of the sled. It should be amply secure and strong enough for the BlueSCSI v2 device.
The mounting holes are designed for 5mm M3 screws (snug fit).
This is not compatible with the BlueSCSI v1.
The BlueSCSI v2 2023.10 board revision resulted in the mounting holes moving from their previous location. As a result this design will not work with that newer revision. I will make an update for the 2023.10 soon.
In some models it will clip securely into place, for others it is simply held in by the friction of the sled. It should be amply secure and strong enough for the BlueSCSI v2 device.
The mounting holes are designed for 5mm M3 screws (snug fit).
This is not compatible with the BlueSCSI v1.
The BlueSCSI v2 2023.10 board revision resulted in the mounting holes moving from their previous location. As a result this design will not work with that newer revision. I will make an update for the 2023.10 soon.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!