Blurryface Hueforge

Blurryface Album Hueforge! |-/Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.3mm and the Actual Depth is 1.1mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions:Start with BlackAt layer #3 (0.32mm) swap to RedAt layer #8 (0.72mm) swap to BlackAt layer #9 (0.8mm) swap to Jade White for the rest. … or use the .3mf file ;) Edit:I added a print profile where the base is a little thicker ("Blurryface v2"). Use the 3mf file and you're good to go! If you only have 1 ams, these are swap instructions: Start with BlackAt layer #14 (1.2mm) swap to RedAt layer #21 (1.76mm) swap to BlackAt layer #24 (2mm) swap to Jade White for the rest.