Thingiverse
BLV Cube nozzle wipe
door JungleTim
2
Downloads
4
Likes
0
Makes
A simple nozzle wipe for the BLV Cube.
Use the head of a metal brush. Slide it into the slot.
Remove the two front bed level knobs and slide this part in under the springs. Reinstall the bed level knobs.
Add code similar to this to your start code:
G1 X10 Y10 Z0.3 F5000.0 ; Move to start position
G1 X80 Y -8 Z0 F3000 ; Move to nozzle wipe start
G1 X110 X170 F3000 ; wipe nozzle
G1 X170 X110 F3000 ; wipe nozzle again
G1 X110 X170 F3000 ; final wipe
G1 X40 Y10 Z0.3 F5000 ; Move to start position
Use the head of a metal brush. Slide it into the slot.
Remove the two front bed level knobs and slide this part in under the springs. Reinstall the bed level knobs.
Add code similar to this to your start code:
G1 X10 Y10 Z0.3 F5000.0 ; Move to start position
G1 X80 Y -8 Z0 F3000 ; Move to nozzle wipe start
G1 X110 X170 F3000 ; wipe nozzle
G1 X170 X110 F3000 ; wipe nozzle again
G1 X110 X170 F3000 ; final wipe
G1 X40 Y10 Z0.3 F5000 ; Move to start position
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!