BLV MGN Hemera Mount

Mounts an E3D Hemera to an Ender 3 with [BLV MGN rail mod](https://www.blvprojects.com/blv-ender-3-pro) which can be obtained [from AliExpress](https://www.aliexpress.com/item/33019547874.html?spm=a2g0s.9042311.0.0.4d9f4c4dAZZRsm)
Requires the "Belt Locker Plate" part
Does NOT use the "X Carriage plate" which comes with the kit

Step 1: Attach the Belt Locker Plate part to the mount wuth 2x M3 bolts (6mm or longer, can be quite long) using holes marked B1 - screws go in from the front
Ensure that hole H2 lines up with the remaining Belt Locker Plate hole
Step 2: Attach the mount to the MGN rail using 4x M3x6 screws using holes marked R1 - screws go in from the front
Step 3: Attach the Hemera to the mount using 3x M3x8 into holes marked H1 from the front and 1x M3x16 into hole marked H2 from the rear. If using LED mount, will need longer screw for the H2 hole

In order to get the endstop to work, you also need the two "X motor adapters" from the kit - these push the endstop sw