BM 800 Microphone Pop Filter

Designed this to replace my cheap pop filter, this solution is stiffer and smaller compared with the circular filter that came with the microphone

Printing:
All parts printed with 0.2mm layer height and 20% infill.

Clamp Body - Support is optional.
Clamp Arm - no support needed, Print with the hole vertical (perpendicular to the printing bed)

Pop Filter Front and Back - Used tree supports in Cura to use less support material.
Printed together vertically oriented.

Glued the Clamp Arm and Pop Filter Back with superglue and sanded the joint to make it clean.