BMW E30 AC Condenser Pads

Pads to support AC condenser for BMW E30 AC. These were designed for the condenser supplied by AC solutions though I believe this is the same as a standard E30 condenser. Example is printed in TPU 90A as it was available but it would likely benefit from being printed in 95A.

Bolt hole designed to fit M5 bolt. In testing a M5x20mm bolt was used with an M5 washer.

As my E30 did not come with air conditioning I used a M5 zinc rivnut to provide an appropriate mounting point.

I am certainly an amateur at both 3D modelling and printing so any feedback would be more than welcome. I have added a fillet to the side closest to the radiator as the car features the same but I believe it is too small to hugely matter when printing. My frame also appears to not be flat, I am unsure if this is a feature of all E30s so I chose not to design the part to cater for it. I believe in my case this is also exacerbated by the condenser seemingly being bowed in the opposite direction. Happy to adjust if i