BMW E30 Hueforge

Printed on A1 Mini with AMS I'm using default “ironing” settings so feel free to turn that off if you don't want any ironing. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x118.99mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA BambuLab Matte Charcoal Transmission Distance: 0.6PLA Hatchbox Matte Navy Blue Transmission Distance: 1.5PLA BambuLab Matte Scarlet Red Transmission Distance: 2PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filaments Swap Instructions:Start with CharcoalAt layer #9 (0.8mm) swap to Navy BlueAt layer #13 (1.12mm) swap to Scarlet RedAt layer #21 (1.76mm) swap to Ivory White for the rest.Boost MeIf you like it BOOST ME FOR FREE