BMW Hueforge Model

Here is an artistic view of a BMW model. You can adjust the scale and add a brim if you prefer, however to not adjust the Z axis(thickness) Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x143.02mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.16mm and the Actual Thickness is 2.16mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 6 #a6a9aa PLA BambuLab Basic Silver Transmission Distance: 0.5 #e2dedb PLA PolyLite White Transmission Distance: 5.1This print uses 5 unique filamentsSwap Instructions: Start with PolyLite Black At layer #8 (0.72mm) swap to Gray At layer #9 (0.8mm) swap to Orange At layer #12 (1.04mm) swap to Silver At layer #17 (1.44mm) swap to White for the rest.Your feedback and rating is highly appreciated and keeps the