Thingiverse
Board Game Spinner V2
von websurfinmurf
6
Downloads
5
Likes
0
Makes
I printed Board Game Spinner, Thing 660370, but I had a few issues.
The bolt would loosen or tighten as it was used, since the arrow was touching the bolt head directly. Second, the board may not be level, so added the 'washer' part to be 3mm thick, helping raise the arrow from the board.
This required me to alter the arrow, making a large hole for the new top. The arrow now spins freely around the newly designed middle 'shaft'.
1 3x16mm socket screw
1 3mm nut
Many thanks to the original creator! I did import and modify in TinkerCad, feel free to use it!
https://www.tinkercad.com/things/1X9I3TwXUTH
The bolt would loosen or tighten as it was used, since the arrow was touching the bolt head directly. Second, the board may not be level, so added the 'washer' part to be 3mm thick, helping raise the arrow from the board.
This required me to alter the arrow, making a large hole for the new top. The arrow now spins freely around the newly designed middle 'shaft'.
1 3x16mm socket screw
1 3mm nut
Many thanks to the original creator! I did import and modify in TinkerCad, feel free to use it!
https://www.tinkercad.com/things/1X9I3TwXUTH
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
