Boat Battery Tray

Apologies for no real life pictures as the boat is currently winterized. This is a boat battery tray which enables you to screw it into your subfloor as well as loop through buckles to hold the battery in place.It was created when I added a secondary battery to my pontoon for running accessories while anchored. It's pretty straight forward and should be relatively universal for group 27 boat batteries. You will need each half as well as 4 joints.The joints are a very tight fit.I printed in PETG and it has been in use for nearly 3 years now. For the screw holes i used a #14 wood screw into my mounting block which was bolted to the floor.The screw hole diameter is 7.15mm and countersunk so a washer can be used if needed.