Thingiverse

Bohrok with Base

by Ombranox

72 Downloads

47 Likes

0 Makes

Almost 1:1 scale with an actual Bohrok figure. Took about 24 hours to print, but it looks really cool. The base is an Amiibo base, just widened to 3 inches.

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

24 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Bohrok with Base need supports when printing?

Yes, Bohrok with Base will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Bohrok with Base?

According to the design notes, Bohrok with Base takes approximately 24 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Bohrok with Base available in?

Bohrok with Base is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Bohrok with Base free to download?

Yes, Bohrok with Base is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Bohrok with Base

Add to Collection