Bōn Fidget Slider

This is my personal Fidget slider design called The Bōn. To assemble the parts, you'll need four M2x4 brass heat set inserts, four M2x4 screws and 16 magnets. For a strong setup, you'll want 16 - 1/4"x 1/8" N52 Magnets from KJ Magnetics. For the Hybrid, you'll want 8-1/4"x 1/8" N52 Magnets and 8- 3/16"x 1/8" N52 Magnets. The heat set inserts are inserted into the holes in the top plates. I print these at 20% Gyroid infill and at .12mm layer height.