Thingiverse
Bonnet shock absorber (Stencil)
par Antonio_EsGa
12
Téléchargements
22
Likes
0
Makes
This design is a stencil to make a support strut to install a shock absorber for the bonnet (Peugeot 206).
You can print the model to see how it fits in the hood bolts of your car and then use it to trace the shape on the metal.
At first I used a 30x1.5mm square tube to make the part, but when I installed it and tested it, it was bent by the force of the shock absorber, so I ended up using a 3mm plate.
Support model v2.0 has a longer reinforcement to prevent it from bending.
You can print the model to see how it fits in the hood bolts of your car and then use it to trace the shape on the metal.
At first I used a 30x1.5mm square tube to make the part, but when I installed it and tested it, it was bent by the force of the shock absorber, so I ended up using a 3mm plate.
Support model v2.0 has a longer reinforcement to prevent it from bending.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !